North Florida Container & Truck Repair
Cylinder Repair

Hydraulic Cylinder Repair & Resealing in Ocala, FL

Leaking or dead cylinder on a compactor, roll-off hoist, or piece of heavy equipment? Bring it to our Ocala shop — we reseal, repair, and rebuild hydraulic cylinders and get them back under pressure.

What We Repair

Cylinders That Hold Pressure Again

Hydraulic cylinders fail the same ways — blown seals, scored rods, bent eyes, cracked mounts. We fix all of it in-shop, on the same equipment we service every day: compactors, roll-off hoists, and the waste-handling gear they drive.

  • Cylinder resealing & repacking
  • Compactor ram & packer cylinders
  • Roll-off hoist & tailgate cylinders
  • Rod, pin & clevis repair
  • Mounts & brackets welded and rebuilt
  • Bench-tested before it leaves the shop

Signs a Cylinder Needs Attention

  • Oil at the gland: a wet rod or a puddle under the unit means the rod seal is going.
  • Drift: a hoist that creeps down or a ram that won’t hold position points to worn piston seals.
  • Lost force: a compactor that won’t pack, or a baler that won’t make a tight bale.
  • Scored or pitted rod: Florida humidity pits exposed chrome, and pitting shreds new seals fast.
  • Cracked eyes and mounts: the steel around the cylinder fails before the cylinder does.

When you call, a photo of the cylinder, the data tag if it has one, and the machine it came off helps us tell you what to expect.

How It Works

Drop Off, Rebuild, Back Under Load

1 · Drop Off or Send a Photo

Bring the cylinder (or the whole unit) to our Ocala shop. Not sure what’s wrong? Send a photo and we’ll tell you what we see.

2 · Tear Down & Reseal

We open it up, inspect the rod and bore, replace seals and worn parts, and repair any structural damage to eyes and mounts.

3 · Test & Return

Rebuilt, tested, and back to you — a fraction of the cost and lead time of a new cylinder.

FAQ

Common Questions

Straight answers on cylinder repair. Not sure if yours is worth fixing? Call or send a photo.

Is resealing cheaper than replacing the cylinder?
Almost always. A reseal or rebuild is typically a fraction of the price of a new cylinder — and for older compactors and hoists, a matching replacement can be hard to source at all.
What kinds of cylinders do you work on?
Mostly the ones on waste equipment — compactor rams, roll-off hoists, tailgates — but the same work applies to cylinders off other heavy equipment. Bring it by or send a photo.
Do I need to bring the whole machine?
No. If you can pull the cylinder, just bring the cylinder. If it’s part of a compactor or truck that needs more work, drop off the whole unit and we’ll handle it together.
Related Services

Everything We Repair

Commercial Compactor Repair

Cylinders are half the story — we repair the whole compactor, structure and all.

Commercial compactor repair →

Truck Repair & Refurb

Hoists, beds, and bodies on garbage and roll-off trucks repaired and refurbished.

Garbage & roll-off truck repair →

Baler Repair

Cardboard balers run on the same hydraulics — we fix those too.

Cardboard baler repair →
Hydraulic cylinder clamped in a bench vise being fitted with a new seal kit
Fitting a new seal kit on a compactor cylinder
Roll-off truck hoist cylinder being serviced with the hoist frame raised
Hoist cylinder work on a roll-off truck

Get That Cylinder Back Under Pressure

Tell us what’s leaking — compactor ram, hoist cylinder, or something off another machine. We’ll reseal or rebuild it and get you back to work.

☎ Call Now Get a Quote